Agent Release Panel SSE-25AR
 
Product Overview :
SSE-25AR Agent Release Panel fully complies with UL-864 and NFPA-72. While implementing the latest in microprocessor technology for conventional panels ease to operate along with clear visible indications come at an advantage for the end user. These panel are a feature packed control unit performing dual function of detection and controlled release of gaseous agent. These panels have 4 detection circuits and 2 agent release circuit with various programmable options. The panel have all the safety features to prevent accidental release, easy to install, commission with user friendly programmable option, this panel is ideal choice to protect the premises.
 
Features :
16x2 Dot Matrix LCD Display.
Operates on 120-220v 60 / 50 Hz, AC Mains power supply.
4 Class B initiating device circuit (IDC).
All zones accept smoke detectors and any normally open contact device.
Any Zone can be configured as Alarm or supervisory Zone.
2 Class B Releasing Agent Circuits (RAC).
2 Class B Notification Appliance Circuits (NAC).
Standby (battery) backup 24v DC power supply with built in charger
Main, Standby status audio visual indication.
Battery Low audio visual warning tone.
3 Form C programmable relays for Fire / fault / supervisory / Gas Released.
Two modes of operations Auto / Manual.
Programmable 24v D.C Outputs.
RS 485 Communication facility (Optional).
200 Events history log with RTC.
Walk Test facility.
Zone Isolation facility with voltage cutt off.
Earth fault annunciation facility.
 
Note: Actual product may different in colour
 
Download Catalogue
All field wiring circuits are Power limited except 220v AC and Battery.
All field wiring circuits are supervised.
AC Low voltage cutoff.
Programmable RAC’s with count down timer.
Programmable AC loss delay
Programmable Trouble remainder.
 
Special Features :
Synergy Indian Manufacturer, International standard.
UL Listed (9th Edition).
Switch Mode Power Supply.
Modular Construction, Serviceable.
Special logic circuitory to prevent accident release.
Auto Resettable Fuse.
Surge Protected.
Battery polarity & deep discharge protection.
  NAC’s Output:
Variable solenoid ON / OFF time.
4 No’s of programmable Initiating Device Circuit and 2 No’s of Releasing Agent circuit, with the independent correlation of any no of initiating devices circuit with any one of Release Agent Circuit.
4 No’s Programmable (Fire, Cross Zone & Gas Release) relays for integration of third party system
Separate LED indications on front facia for individual Releasing Agent Circuit.
 
 
 
Agent Release Panel SSE-120GR
 
Product Overview :
SSE-120GR is a microprocessor based Agent Release Panel. These panel are a feature packed control unit performing dual function of detection and controlled release of gaseous agent. These panels have 2 detection circuits and 1 agent release circuit with various programmable options. The panel have all the safety features to prevent accidental release, easy to install, commission with user friendly programmable option, this panel is ideal choice to protect the premises.
 
Features :
Operates on 220V, A.C supply
Battery backup with built in charging.
16 X 2 LCD Dot Matrix Display.
Evacuate and Key pad Enable, Disable Facility.
Low battery visual warning with audible tone.
Relay output for actuators.
Provision for Remote fire with Audio / Visual Indications.
Compatible to all types of conventional detectors.
Zone Disable (Isolation) facility with loop voltage cut off.
Resettable 24v DC output for 4 wire detectors.
Three 24V Sounder Output (Fire, after Cross zone, after gas release).
Two mode operation facility (Auto / Manual).
Programmable Solenoid Output with ON and OFF Timer.
Programmable Main / Standby Cylinder output Facility.
Gas Inhibit and Instant release facility.
Manual Gas Release with or without timer.
Actuator pressure low sensing facility.
RS 485 Output for Repeater.
 
Note: Actual product may different in colour
 
Download Catalogue
 
Special Features :
Synergy Indian Manufacturer, International standard.
Modular Construction, Serviceable.
Special logic circuitory to prevent accident release.
Auto Resettable Fuse.
Surge Protected.
Battery polarity & deep discharge protection.
  NAC’s Output:
Variable solenoid ON / OFF time.
2 No’s of programmable Initiating Device Circuit and 1 No’s of Releasing Agent circuit.
 
 
 
FIRE EXTINGUISHERS
 
FIRE SUPPRESSION SYSTEMS
 
HYDRANTS
 
TEST EQUIPMENT
 
PRODUCTION EQUIPMENT
 
©Copyright 2013. Swastik Synergy Engineering Pvt.Ltd. | Web Design & Maintained by Cronic Technologies